**Question by: Fabiano Rizzo** | Last updated: September 25, 2021

Rating: 4.3 / 5

(4 votes)

(in symbols m2 or, in the Italian tradition, m2) unit of measurement of the area, equivalent to the area of a square with a side of one meter.

## How to transform linear meters into square meters?

It is not possible to convert the two units of measurement and therefore it is not possible to switch from square meters to meters; this is because it is not possible to convert a surface to a length.

## What does a square meter correspond to?

Square meter – Square meter. The square meter or square meter, indicated with the symbol m^{2}is a unit of measurement of the surface of the International System defined as the area of a square with a side equal to 1 meter.

## How is a square meter measured?

1) we measure the width and length of the area whose square meters we want to calculate using a meter; 2) we express the results obtained in meters; 3) multiply the measurement of the width by that of the length; the result will be the number of square meters of the measured area.

## What does 100 commercial square meters mean?

The COMMERCIAL square meters are the sum of the spaces of the entire building, including the walls. … The walkable square meters, on the other hand, are the surfaces where I can physically walk and, in the count, 100% of the square meters are taken into consideration, excluding the walls.

**Find 26 related questions**

The commercial area is also known by the acronym SCV (Salable Commercial Area), meaning with it the sum of the “weighted areas” that make up the property and the objective criterion of reference to which to measure the asset valuations of the real estate units.

The usable surface is the net of the commercial

While the commercial area also includes walls, external uncovered areas (terraces, balconies, verandas, etc …) and exclusive dependencies (porches, courtyards).

Calculating the area of a rectangle with the same method is just as simple: we will calculate it like this: “Area = base * height”. Thus. In square meters, we will have a square of 12 square meters with a rectangle of base 3 and height of 4, while we will have one of 35 square meters with a base of 7 and height of 5.

How is it calculated?

- for a building in reinforced concrete 10% of the total surface is removed;
- for houses with “historic” tuff walls, 15% is removed;
- if there are external surfaces, 25% is usually eliminated.

A hectare, whose symbol is ha, represents a unit of measurement of the area, which has been recognized by the International System of Units. Its size corresponds to 10,000 m² (square meters). It represents a multiple of the ara and centiara, which are other units of measurement.

Taking a simple case, if a condominium with 10 apartments has a total area, given by the sum of the surfaces of the apartments, equal to 1,000 square meters, and each apartment has an area of 100 square meters, the thousandth part of each apartment will be 100 thousandths.

50 kg / [(7.8 kg/dm3)*(10 mm)] = about 0.64 SQM.

If the house has two floors, multiply the floor area by 1.5. Always taking into account the example described above, you should get a roof area of 277 m^{2}a value very close to the first result.

Calculate the area of the rectangle. that is the product of base and height, but the problem instead gives us only their relationship and the perimeter. The perimeter of the rectangle is nothing more than the sum of the base and height multiplied by two, so dividing the perimeter by two we get the sum of the base plus the height.

The length of the two longer opposite sides is called the length or base of the rectangle, while the length of the two shorter sides is called the width or height.

To calculate how many tiles to order for the floors, you need to know the size of the rooms. By adding an additional 10%, equal to 1.8 square meters, the total to be ordered will be: 18 1.8 = 19.8 square meters.

For those who want to calculate the square meters of the walls and the scrap more quickly, just add all the sides of the walls and multiply the total by the height (without subtracting the openings). To the area thus obtained it is sufficient to add a percentage of 5% of the total as scrap.

The cadastral area, understood as the building cadastre, represents the sum of the various types of surface of an urban real estate unit, from the main part taken in full, including the thickness of the walls up to a maximum of 50 cm, to the direct and indirect accessories considered in the percentage like …

Generally, for non-residential assets such as garages or parking spaces, the consistency indicates the net area of the property and the cadastral area the gross one, i.e. including the thickness of the walls (the gross is obtained from the DocFa procedure, but on this I do not I dwell on it).

Also called “salable commercial area” (SCV), it represents an objective parameter to be followed for asset valuations. The mathematical formula used to calculate it is: “Commercial area x Quotation per square meter x Coefficients of merit”.

How is it calculated? As regards the uncovered garden area or similar: 10% of the area up to five times that covered by the real estate unit; 2% for surfaces that exceed this limit on the main rooms and on those serving direct service (bathroom, closet, etc.).

To calculate the market value of a property, the mathematical formula is used: Market value = Commercial surface * Quotation per square meter * Coefficients of merit.

Visit Business Planers for more quality information.